CUSTOMER SERVICE MON-FRI 8-5 CENTRAL 800-325-6878


Wholesale Cabinet Components Homepage About Us Login Cancel Order Shipping Policy My Account Sales Tax

>
TITEBOND 2403 WOOD MOLDING GLUE 8 OZ-BOTTLE
TITEBOND 2403 WOOD MOLDING GLUE 8 OZ-BOTTLE
  • Currently 0/5 Stars.
No reviews
 
Nickname*
Location*
Subject*
Comments*
Rating*
  • Currently 0/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
$3.04

Titebond 2403 8 OZ Bottle
Titebond No-Run, No-Drip Wood Glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown molding, baseboards, window casings and other applications requiring a professional-strength, no-run wood glue.

Titebond No-Run, No-Drip provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. 

Download Titebond No-Run, No-Drip Wood Glue Sales Sheet

Conforms to ASTM D-4236

Product Features

  • Thick - No-runs, No-drips
  • Versatile - Bonds most porous and semi-porous materials
  • Fill small cracks and gaps
  • Strong initial tack - Fast set
  • Unaffected by finishes
  • Excellent sandability
  • Good heat resistance
  • Nonflammable - No offensive odor

Physical Properties

Type Thixotropic polyvinyl acetateCalculated VOC 9.8 g/L
State High-viscosity liquidWeight/gallon 9.0 lbs.
Color BeigeChalk temperature Approximately 50°F.
Dried Film TranslucentFlashpoint > 200°F.
Solids 60%Freeze/thaw stability Stable
Viscosity 36,500 cpspH 4.8
Storage life 24 months in tightly closed containers at 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
 TemperatureStrengthWood Failure
 Room Temperature3,000 psi7%
 150°F. Overnight650 psi0%

Application Guidelines

Application Temperature Above 50°F.

Open assembly time 3-5 minutes (70°F./50%RH)

Total assembly time 10-15 minutes (70°F./50%RH)

Minimum required spread Approximately 6 mils or 250 square feet per gallon

Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond No-Run, No-Drip Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
BEST SELLING DRAWER SLIDES
: Contact Us : Returns : Register : Login : Privacy : Retrieve Cart : Shipping Policy : Sales Tax : Privacy : Site Map : Magic Woodrepair : Westlund Distributing : Site Map Dept : XML SITEMAP
Wholesale Cabinet Components is an Upfront Merchant on TheFind. Click for info.