Click to see larger preview

TITEBOND 6231 INSTANT GEL 2 OZ

Currently 0/5 Stars.

No reviews


Nickname*
Location*
Subject*
Comments*
Rating*	Currently 0/5 Stars. 1 2 3 4 5

$8.77

TITE 6231 TITEBOND INSTANT GEL 2 OZ

Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

The gel viscosity product offers the longest assembly time of 30 seconds and an initial cure speed of 20 seconds. It is ideal for gap-filling applications, gluing porous and odd-shaped surfaces and various cabinet making applications, such as pre-bonding moldings to install as one unit.

Product Features

Fast set - Eliminates clamping or reduces clamp time
Bonds stronger than wood
Excellent heat and solvent-resistance
Unaffected by finishes
Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
2 year shelf life
Triple distilled for purity & consistency
Impact-resistant
No-clog applicator for easy use and waste reduction
Ideal for bonding miter joints on MDF and porous woods
Excellent for filling large gaps
High viscosity allows time for positioning parts
MIL Spec (A46050C) Type II, Class 2

Physical Properties

Type Ethyl cyanoacrylate	Non-reactive VOC 20 g/L
State Liquid	Weight/gallon 9.18 lbs.
Color Clear	Flashpoint > 178° F.
Dried Film Translucent	Freeze/thaw stability Stable
Solids 100%	Specific gravity 1.1
Viscosity 60,000 cps	Storage life 2 yrs in tightly closed bottles stored between 40° & 75°F

Bond Strength ASTM D-1002

Temperature	Shear Strength psi
Room Temperature	Between 2800 and 4200 psi depending on substrate tested

Application Guidelines

Application Temperature Above 50°F.

Cure Speed 30 second handling, 20 second set, 60 second cure. *Full cure in 8 hours.

Service Temperature Range -65° to 200° F.

Cleanup Use acetone. Follow solvent vendor’s precautions.

Limitations

Titebond Instant Bond Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 55°F and 85°F. KEEP FROM FREEZING.

Caution Statements

DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat. FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, flush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Material Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN.