Click to see larger preview

TITEBOND II 5006 1-GAL ADHESIVE

Currently 0/5 Stars.

No reviews


Nickname*
Location*
Subject*
Comments*
Rating*	Currently 0/5 Stars. 1 2 3 4 5

$19.75

TITE 5006 TITEBOND II 1-GAL ADHESIVE

Titebond II Premium Wood Glue is the only leading brand, one-part wood glue that passes the ANSI Type II water-resistance specification. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables.

Titebond II Premium provides a strong initial tack, fast speed of set, superior strength and excellent sandability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio frequency (R-F) gluing systems.

Conforms to ASTM D-4236

Product Features

First one-part wood glue to pass ANSI Type II water-resistance
Designed for exterior use
Excellent sandability
Unaffected by finishes
FDA approved for indirect food contact
Ideal for radio frequency (R-F) and hot press gluing systems
Easy cleanup with water

Physical Properties

Type Cross-linking polyvinyl acetate	Calculated VOC 5.5 g/L
State Liquid	Weight/gallon 9.1 lbs.
Color Honey cream	Chalk temperature * Approximately 55°F.
Dried Film Translucent, yellow	Solids 48%
Freeze/thaw stability Stable	Flashpoint > 200°F.
Viscosity 4,000 cps	pH 3.0
Storage life 24 months in tightly closed containers at 75°F.

*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature	Strength	Wood Failure
Room Temperature	3,750 psi	72%
150°F. Overnight	1,750 psi	6%

Application Guidelines

Application Temperature Above 55°F.

Open assembly time 5 minutes (70°F./50%RH)

Total assembly time 10-15 minutes (70°F./50%RH)

Minimum required spread Approximately 6 mils or 250 square feet per gallon

Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Caution Statements

CAUTION: EYE AND SKIN IRRITANT. Contains aluminum chloride. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.