CUSTOMER SERVICE MON-FRI 8-5 CENTRAL 800-325-6878


Wholesale Cabinet Components Homepage About Us Login Cancel Order Shipping Policy My Account Sales Tax

>


TITEBOND III 1414 16 OZ
  • Currently 0/5 Stars.
No reviews
 
Nickname*
Location*
Subject*
Comments*
Rating*
  • Currently 0/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
$7.12

Titebond III 1414 16 OZ
Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. 

Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.

Conforms to ASTM D-4236

Product Features

  • Passes ANSI/HPVA Type I water-resistance
  • Waterproof formula that cleans up with water
  • Superior strength - Strong initial tack
  • Designed for interior and exterior applications
  • Longer open assembly time
  • Lower application temperature
  • Unaffected by finishes
  • FDA approved for indirect food contact

Physical Properties

Type Advanced Proprietary PolymerCalculated VOC 5.6 g/L
State LiquidWeight/gallon 9.22 lbs
Color TanChalk temperature * Approximately 45°F
Dried Film Light brownFlashpoint > 200°F.
Solids 52%Freeze/thaw stability Stable
Viscosity 4,200 cpspH 2.5
Storage life 24 months in tightly closed containers below 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
 TemperatureStrengthWood Failure
 Room Temperature4,000 psi57%
 150°F Overnight800 psi0%

Application Guidelines

Application Temperature Above 47°F.

Open assembly time 10 minutes (70°F./50%RH)

Total assembly time 20-25minutes (70°F./50%RH)

Minimum required spread Approximately 6 mils or 250 square feet per gallon

Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Caution Statements

No caution information is needed. Please refer to the Material Safety Data Sheet for further information.
BEST SELLING DRAWER SLIDES
: Contact Us : Returns : Register : Login : Privacy : Retrieve Cart : Shipping Policy : Sales Tax : Privacy : Site Map : Magic Woodrepair : Westlund Distributing : Site Map Dept : XML SITEMAP
Wholesale Cabinet Components is an Upfront Merchant on TheFind. Click for info.