CUSTOMER SERVICE MON-FRI 8-5 CENTRAL 800-325-6878


Wholesale Cabinet Components Homepage About Us Login Cancel Order Shipping Policy My Account Sales Tax

>


TITEBOND 2316 FLUORESCENT 1 GAL
  • Currently 0/5 Stars.
No reviews
 
Nickname*
Location*
Subject*
Comments*
Rating*
  • Currently 0/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
$20.91

TITE 2316 TITEBOND FLUORESCENT; 1 GAL 
Titebond II Fluorescent can help any woodworker achieve professional-looking results. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops bonds stronger than wood, offers excellent sandability and is unaffected by finishes.

Titebond II Fluorescent contains a dye that, when viewed under a black light, enables woodworkers to inspect the glue line and assist in the cleanup process. It is ideal for most porous materials, is easy to use and cleans up with water.

Download Titebond II Fluorescent Sales Sheet

Product Features

  • Visible under black light
  • Enables detection and removal of dried glue before finishing
  • Passes ANSI Type II water-resistance
  • Versatile - Bonds wood, hardboard, high pressure laminates and particleboard
  • Solvent-resistant
  • Fast set - Shortens clamp time
  • Ideal for radio frequency (R-F) gluing systems
  • Easy cleanup with water

Physical Properties

Type Cross-linking polyvinyl acetateNon-reactive VOC 5.5 g/L
State LiquidWeight/gallon 9.1 lbs.
Color Honey creamChalk temperature * Approximately 55°F.
Dried Film Translucent, yellowFlashpoint > 200°F.
Solids 48%Freeze/thaw stability Stable
Viscosity 4,000 cpspH 3.0
Storage life 24 months in tightly closed containers at 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
 TemperatureStrengthWood Failure
 Room Temperature3,750 psi72%
 150°F. Overnight1,750 psi6%

Application Guidelines

Application Temperature Above 55°F.

Open assembly time 5 minutes (70°F./50%RH)

Total assembly time 10-15 minutes (70°F./50%RH)

Minimum required spread Approximately 6 mils or 250 square feet per gallon

Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond II Fluorescent Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Not FDA approved for indirect food contact. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Caution Statements

CAUTION: EYE AND SKIN IRRITANT. Contains aluminum chloride. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
BEST SELLING DRAWER SLIDES
: Contact Us : Returns : Register : Login : Privacy : Retrieve Cart : Shipping Policy : Sales Tax : Privacy : Site Map : Magic Woodrepair : Westlund Distributing : Site Map Dept : XML SITEMAP
Wholesale Cabinet Components is an Upfront Merchant on TheFind. Click for info.