Click to see larger preview

TITEBOND 9106 EXTEND 1 GALLON

Currently 0/5 Stars.

No reviews


Nickname*
Location*
Subject*
Comments*
Rating*	Currently 0/5 Stars. 1 2 3 4 5

$16.80

TITE 9106 TITEBOND EXTEND 1 GALLON

Titebond Extend Wood Glue is a slower setting version of Titebond Original Wood Glue. It offers superior performance in a broad range of applications, including edge and face gluing. It is particularly useful in complex operations such as curved railings and other assemblies that require more time to align.

Titebond Extend develops a bond stronger than wood itself, offers excellent sandability and is unaffected by finishes. It is compatible with all common species of wood, as well as particleboard, MDF, plywood and other porous materials.

Product Features

Slower speed of set - Longer working time
Excellent heat-resistance
Water cleanup & non-toxic
Versatile - Bonds wood, particleboard, MDF, plywood and other porous materials
Ideal for complex assemblies and bent laminations

Physical Properties

Calculated VOC 3.12 g/L	State Liquid
Weight/gallon 9.7 lbs.	Color Yellow
Chalk temperature Approximately 40°F.	Dried Film Yellow
Flashpoint > 200°F.	Solids 42.3%
Viscosity 3,500 cps	pH 4.8
Storage life 12 months in tightly closed containers at 70°F.

*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature	Strength	Wood Failure
Room Temperature	3,510 psi	81%
150°F. Overnight	3,120 psi	61%

Application Guidelines

Application Temperature Above 40°F.

Open assembly time 15 minutes (70°F./50%RH)

Total assembly time 20-25 minutes (70°F./50%RH)

Minimum required spread Approximately 6 mils or 250 square feet per gallon

Required clamping pressure Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond Extend Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Extend. Not for structural of load bearing applications. Do not use when temperature, glue or materials are below 40°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. It is recommended that Titebond Extend Wood Glue not be stored for extended periods at temperatures lower than 40°F. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.

Caution Statements

CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.