TITEBOND 6311 ACTIVATOR 2 OZ

Currently 0/5 Stars.

No reviews


Nickname*
Location*
Subject*
Comments*
Rating*	Currently 0/5 Stars. 1 2 3 4 5

$5.49

TITE 6311 TITEBOND ACTIVATOR 2 OZ

Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

Instant Bond Activator is used to accelerate the curing of all Titebond Instant Bond Adhesives. The Activator is especially effective for large gaps, very porous woods and bridge bonding joints, bonding acidic surfaces or in low humidity conditions. It is a heptane-based solvent that will not mar finishes or damage plastics.

Product Features

Designed for use with all Titebond Instant Bond Adhesives
Accelerates the curing of Titebond Instant Bond Adhesives
Especially effective for large gaps, very porous woods and bridge bonding joints
Useful when bonding acidic surfaces or in low humidity conditions
Heptane-based solvent will not mar finishes or damage plastics

Physical Properties

Type Heptane-based accelerator	Non-reactive VOC 720 g/L
State Liquid	Weight/gallon 6.59 lbs.
Color Clear	Flashpoint 15° F.
Viscosity 3 cps	Freeze/thaw stability Stable
Percent volatile 100%	Specific gravity 0.79
Storage life 24 months in unopened containers under 50°F.

Application Guidelines

Application Temperature Above 50°F.

Assembly time after application Immediate (70°F./50%RH)

Method of Application Spray bottle or brush

Limitations

Titebond Instant Bond Activator is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times of Titebond Instant Bond Adhesives may be affected by environmental conditions. Product is extremely fl ammable. Keep away from heat, sparks and flame.

Caution Statements

DANGER: EXTREMELY FLAMMABLE LIQUID. VAPOR HARMFUL. Contains heptane and methylcyclohexane. Keep away from heat, sparks and fl ame. Use only with positive cross ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Exposure may cause CNS, eye, skin or respiratory system effects. FIRST AID: If inhaled, remove to fresh air. Seek medical attention if symptoms persist. Eye contact: Flush eye with water for 15 minutes and seek medical attention immediately. If swallowed, do not induce vomiting; contact physician immediately. For skin contact, wash contact area with soap and water. Contact physician if irritation persists. Refer to Material Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN.

WARNING: This product contains trace amounts of benzene and toluene, chemicals known to the State of California to cause cancer and birth defects.