TITEBOND 2611 100% SILICONE CL-10.3

Currently 0/5 Stars.

No reviews


Nickname*
Location*
Subject*
Comments*
Rating*	Currently 0/5 Stars. 1 2 3 4 5

$4.99

TITE 2611 TITEBOND 100% SILICONE CL-10.3 Discontinued by Vendor 179 OH as of 08/21/12 Call or E-mail for Availability.

Titebond 100% Silicone Sealant is a versatile 100% silicone formula that is ideal for both interior and exterior applications. It offers excellent adhesion to many common construction materials, including vinyl, aluminum, brick, glass and painted surfaces. It also provides a strong, flexible seal that offers excellent water-resistance.

When fully cured, Titebond 100% Silicone Sealant can withstand extreme temperature conditions. It will not crack or become brittle with age and will not fade or yellow from its original color. It also extrudes easily in lower temperatures and dries quickly.

Certified to Federal Specification TT-S-001543A Class A and TT-S-00230C
Passes ASTM C920 Type S Grade NS Class 25
Complies with FDA under 21 CFR 177.2600 for indirect food contact applications

Product Features

Designed for interior and exterior applications
Excellent adhesion to most building materials
Provides a watertight, mildew-resistant seal
Withstands extreme temperature changes
Maintains color with age - will not crack or become brittle

Physical Properties

Type Silicone (reactive)	Non-reactive VOC 29 g/L (<4% wt.)
State High-viscosity caulk	Weight/gallon 8.6 lbs.
Color Translucent, white and colors	Flashpoint > 200°F.
Solids 96%	Freeze/thaw stability Will not freeze
Viscosity 250,000 cps	Storage life 24 months in tightly closed containers at 75°F.

Coverage (maximum): Approximate length of bead according to bead diameter:

Container	1/4" bead	3/8" bead	1/2" bead
10.1 oz. Cartridge	31 ft.	13.5 ft.	7.5 ft.

Application Guidelines

Application Temperature -40°F. to 140°F.

Service Temperature Range -60°F. to 350°F.

Method of Application Cartridge/caulking gun

Working Time Approximately 15-20 minutes for a 1/4" bead

Working Surfaces Surfaces to be caulked should be clean, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion.

Cleanup Uncured material may be cleaned with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions when using solvents.

Limitations

Do not apply if rain is expected within 12 hours. Titebond 100% Silicone Sealant should not be painted. The paint film will not stretch with the expansion of the caulk and the paint may crack or peel. It is not designed for continuous submersion or use below the waterline. For questions, please call our toll free Help Line 1-800-347-4583 or visit us at titebond.com.

Caution Statements

CAUTION: EYE, SKIN AND RESPIRATORY IRRITANT. Avoid contact with eyes. Do not handle contact lenses with product on hands. Avoid contact with skin and clothing. Wash thoroughly after handling. Avoid breathing vapors. Use with adequate ventilation. First Aid: In case of eye contact, flush eyes with water for 15 minutes; contact physician. In case of skin contact, wash skin with soap and water. Remove contaminated clothing and shoes. Contact physician if irritation persists. If breathing difficulty occurs, remove to fresh air. Product releases acetic acid (vinegar-like odor) during cure. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Certified to Federal Specification TT-S-001543A Class A and TT-S-00230CPasses ASTM C920 Type S Grade NS Class 25Complies with FDA under 21 CFR 177.2600 for indirect food contact applications