Application Temperature 0°F. to 100°F.
Service Temperature Range -20°F. to 120°F.
Method of Application Cartridge/caulking gun
Working Time Approximately 10-20 minutes for a 1/4" bead
Working Surfaces Surfaces to be bonded should be clean, dry and free from any material that may deter adhesion. Apply adhesive to only one of the surfaces to be bonded. Apply mastic to panel perimeters and on 16-inch centers or a criss-cross pattern to ensure maximum adhesion. Temporary bracing or nailing may be needed to improve contact until adhesive dries. Allow to cure overnight for maximum strength.
Cleanup Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor ’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.