CUSTOMER SERVICE MON-FRI 8-5 CENTRAL 800-325-6878


Wholesale Cabinet Components Homepage About Us Login Cancel Order Shipping Policy My Account Sales Tax

>
TITEBOND 4016 MELAMINE GLUE 1 GALLON
TITEBOND 4016 MELAMINE GLUE 1 GALLON
  • Currently 0/5 Stars.
No reviews
 
Nickname*
Location*
Subject*
Comments*
Rating*
  • Currently 0/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
$22.50

TITE 4016 MELAMINE GLUE 1 GALLON 
Titebond Melamine Glue is designed for bonding wood, particleboard, MDF and other porous substrates to synthetic materials such as melamine, vinyl and HPL as well as metals. It offers a fast initial tack, yet has a longer open time that allows for the accurate alignment of working materials.

Titebond Melamine Glue is a water-based adhesive that is nonflammable, has low odor, dries clear and cleans up with water. Its thicker formulation offers fewer runs and drips, making it easier to use and more effective for precise assemblies.

Download Titebond Melamine Sales Sheet 

Conforms to ASTM D-4236

Product Features

  • Bonds melamine, vinyl coated products, and HPL to porous materials
  • Thicker formulation - fewer runs and drips
  • Fast setting - Excellent strength
  • Dries clear
  • Long open time
  • Fast initial tack

Physical Properties

Type Specialized vinyl acetate emulsionCalculated VOC 3.0 g/L
State LiquidWeight/gallon 8.6 lbs .
Color WhiteChalk temperature * Approximately 40 °F.
Dried Film ClearFlashpoint > 200 °F.
Solids 57%Freeze/thaw stability Unstable
Viscosity 12,000 cpspH 4.0
Storage life 24 months in tightly closed containers at 75 °F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
 SubstratesStrengthSubstrate Failure
 Melamine/Melamine Lap Shears329 psi100%
 Melamine/particle Board339 psi100%

Application Guidelines

Application Temperature Above 40 °F.

Open assembly time 5 minutes (70 °F./50%RH)

Total assembly time 10-15 minutes (70°F./50%RH)

Minimum required spread Approximately 6 mils or 250 square feet per gallon

Required clamping pressure Enough to bring joints tightly together (generally, 30-80 psi for HPL,100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond Melamine Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.

Caution Statements

CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate and dipropylene glycol n-butyl ether. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
BEST SELLING DRAWER SLIDES
: Contact Us : Returns : Register : Login : Privacy : Retrieve Cart : Shipping Policy : Sales Tax : Privacy : Site Map : Magic Woodrepair : Westlund Distributing : Site Map Dept : XML SITEMAP
Wholesale Cabinet Components is an Upfront Merchant on TheFind. Click for info.