TITEBOND 2207 DOWELING GLUE 45LB PAIL

Currently 0/5 Stars.

No reviews


Nickname*
Location*
Subject*
Comments*
Rating*	Currently 0/5 Stars. 1 2 3 4 5

$129.47

Titebond 2207 DOWELING GLUE 45LB PAIL

Titebond Doweling Glue is specifically designed for use with automatic doweling equipment. Its low viscosity (1500 cps.) allows the appropriate flow through feed lines and injectors of most U.S.-made doweling machinery.

Titebond Doweling sets fast to reduce assembly time, offers excellent strength and provides a translucent glue line. It is formulated for use on solid woods, particleboard, MDF, plywood and other porous materials.

Product Features

For use with American-made doweling equipment
Excellent strength
Fast setting
Low viscosity for better flow
Dries translucent

Physical Properties

Type Polyvinyl acetate emulsion	Calculated VOC 10.2 g/L
State Liquid	Weight/gallon 9.1 lbs.
Color White	Chalk temperature Approximately 50°F.
Dried Film Translucent	Flashpoint > 200°F.
Solids 51%	Freeze/thaw stability Stable
Viscosity 1,500 cps	pH 4.5
Storage life 12 months in tightly closed containers at 70°F.

*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature	Strength	Wood Failure
Room Temperature	3,650 psi	68%
150°F. Overnight	1,250 psi	1%

Application Guidelines

Application Temperature Above 50°F.

Assembly Time After Glue Application 0-5 minutes (70°F./50% RH)

Method of Application Compatible with most U.S.-made doweling machines. See your machine’s manual for details.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond Doweling Glue is specifically designed for use with American-made doweling equipment. Because of its low viscosity it is not well suited for other assembly applications. This product may be used as supplied or diluted with water by as much as 5% to improve flow. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.

Caution Statements

CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.